Should Cycling Power Ranges Be Adjusted For Temperature?

 

Heat is an endurance athlete’s biggest enemy. A human on a bicycle only achieves 20-25% mechanical efficiency, meaning the majority of the energy you produce is lost as heat. And when the air temperature rises that heat leads to a well-documented drop in lactate threshold power output. But the question is: how does this information affect your training and racing strategies?

Choice #1: You could reduce your effort levels in the heat to reflect lower, calculated power ranges. In other words, if your lactate threshold is 275 watts at 73 degrees Fahrenheit, you could reduce it by 6.5% (Tatterson et al, 2000) to 256 watts when it’s 90 degrees.

Choice #2: You could rely more heavily on perceived exertion in hot weather and race as aggressively as you normally would, understanding that when you analyze the data later your power outputs might be lower than expected.

To help you make your choice let’s first look at what happens when you get hot.

Your body directs more blood to the skin

You have a total of about 10 pints of blood in your body and it has to supply oxygen to every cell, including your working muscles. The circulatory system also transports heat, and when core temperature increases your body increases blood flow to the skin for both convective and evaporative cooling (sweat comes from intercellular fluid, which comes from blood plasma). As these two imperatives (oxygen delivery and heat dissipation) compete for resources your cardiovascular system is forced to work harder, which is observed as an elevated heart rate.

Fluid loss accelerates

When you’re working hard you generate a lot of heat and in hot environments convective cooling isn’t as effective because there isn’t a big temperature gradient between skin and air temperatures. As a result you are more reliant on evaporative cooling from sweat, so the floodgates open up. You can lose up to 1.5 liters of fluid per hour in hot conditions. As you acclimate to exercising in heat, your plasma volume will increase, you’ll start sweating sooner, you’ll sweat more profusely, and your sweat will contain fewer electrolytes per unit volume.

Gross efficiency declines

Efficiency can be measured by the ratio between mechanical output (power) and the metabolic output (VO2) to produce it. A 2007 study by Hettinga, et al found that a decline in gross efficiency could account for up to half a cyclist’s heat-induced performance decline. They cited increased metabolic output from increased cardiac output, increased ventilation, and possibly an increase in an athlete’s underlying resting metabolic rate as likely reasons for the reduction in mechanical power production in a hot environment.

So, back to the question. Should you proactively reduce your power ranges for hot-weather workouts and competitions?


Free Cycling Training Assessment Quiz

Take our free 2-minute quiz to discover how effective your training is and get recommendations for how you can improve.


adjust Cycling Power Ranges for Temperature? 

No. Why? It is difficult to accurately correct for temperature-related decrements in performance in real time and in the real world. There are other factors in play. Air resistance decreases at higher air temperatures, which can save you watts. You also don’t know your exact hydration status or core temperature in real time. There are some promising software solutions that may soon be able to better correct for these variables and minimize the percent error, but with current technology if you back off based on calculations you’re basically just guessing.

Hot-Weather Performance Strategies

In competition it’s important to remember that everyone is competing in the same heat, and while some athletes will cope with it better than others, all will affected. Your best option is actually the least technical. Train in the heat to acclimatize prior to competition, optimize your cooling strategies, and focus on learning to correlate your perceived exertion to your power data. When it’s go-time in a race, use your perceived exertion (it’s more accurate than you think) and determination to dig deep and do what you have to do; just understand that in the heat your actual power outputs may be 5-7% lower than you expect for that exertion level.

In training it’s the power output that leads to the adaptation. You can achieve “normal temperature” power outputs in high temperature environments, but doing so generates a ton of heat you’ll struggle to dissipate, which means you won’t be able to achieve those necessary power outputs for as long. When air temperature hot (80+ Fahrenheit) and 10-15 or more degrees hotter than the temperature you’re acclimated to, shorten individual lactate threshold intervals and, if you’re able to maintain the appropriate power output for these shorter intervals, add an additional interval so the total time-at-intensity remains the same. For shorter high-intensity interval sessions, like VO2 max workouts featuring 1- to 3-minute efforts, you don’t want to reduce the duration of each interval but can break up your intervals into sets so you can complete the same total time-at-intensity for the workout.

Chris Carmichael
CEO/Head Coach of CTS


FREE Mini-Course: Learn How to Maximize Your Limited Training Time

Learn step-by-step how to overcome limited training time and get faster. Walk away with a personalized plan to increase your performance.

This field is for validation purposes and should be left unchanged.

Comments 4

  1. Pingback: Cycling Talk: Training and Riding in the Heat - VolyoomFIT

  2. I’ve found I can help my body achieve “normal temperature” power outputs (or at least close the gap a little) with assisting evaporative cooling by trying to keep my skin as wet as possible with supplemental water. In races that means ice socks and dumping water on my head. In training, because I obviously don’t have a team car with extra water bottles to waste, I’ve found great success with Spruzza Mist. It’s a simple mister device that mounts on the stem and has a small water reservoir. I can get the same cooling effect as dumping water from a bottle, but it’s much more efficient taking less effort and water volume. www.spruzzamist.com

  3. What about altitude such as 6,000 feet in Boulder – should power be reduced or should one use HR as a guide, ie HR Zone 3, due to the effects off less oxygen races? I heard this suggestion at IM Boulder 2 days before the race and tried it but my power level dropped significantly. I did feel fresher for the run and finished well at the end but could have pressed a bit harder on bike power level.

  4. This is a timely article. Last night was race night with the local group. This week, we’ve been hit with 100 (high 90 at night when we race). I work indoors all day and do more of indoor training when the weather is extreme. During the day, I’ve been sluggish (unusual) and just wanting to sleep. I’ve been hydrating. However, during the race, my HR shot up to the 170’s. For my power output, should have normally been in the 150’s maybe 160’s. Legs felt fine, HR is what held me back, not power output. Too me, boils down to acclimatization and other factors going on with the individual. I woke up next morning with slight headache (unusual for me) because my HR was working to an extreme in the night prior.

Leave a Reply

Your email address will not be published. Required fields are marked *